All articles

29 March 2026

Cleaning an EMS suit: How to do it (step by step)

Rear view of a woman raising her arms in an EMS suit with back straps

An EMS suit is worn close to the body and exposed to sweat during training. That makes proper cleaning important, so it lasts longer and works as it should.

Cleaning does not have to be difficult, but it is important to follow the right order and take care of the materials and electronics.

Here is a simple step-by-step guide. Note: Use the laundry bag provided

When washing the suit in a washing machine, always use the laundry bag supplied. It helps protect the suit during washing and reduces unnecessary wear on the material.

The laundry bag is particularly helpful because it protects the suit from rough contact with the drum and other clothes in the machine. This makes washing gentler and helps preserve both fit and durability over time.

1. Remove the electronics

Before you start cleaning, first remove the advanced control unit from the suit. On our EMS suits, this is the part that must be detached before the suit can be wiped down or washed. The suit itself must not be cleaned with the control unit attached. Always make sure the control unit has been removed before moving on to the next step.

2. Wipe down the suit between sessions

Between sessions, the suit can be cleaned by hand using wet wipes or a cloth with mild soap and Rodalon. This is an easy way to remove sweat and keep the suit fresh day to day.

If you use the suit often, this routine makes it easier to keep it clean between more thorough washes.

3. Machine-wash the suit when needed

When the suit needs a more thorough clean, it can be machine-washed at 30 degrees with mild laundry detergent. It is important to keep washing gentle so the material and suit retain their fit and function.

Avoid harsh cleaning products and unnecessarily rough treatment.

4. Avoid high heat

EMS suits should not be exposed to high heat. Avoid tumble drying and very hot conditions after washing.

High heat can affect the material, elasticity and the suit's contact surfaces.

5. Make sure the suit is free from soap residue

If you have cleaned the suit with a cloth and soap, it is important not to leave any residue on the material. This can affect both comfort and how the suit feels during training.

For machine washing, use an appropriate amount of mild laundry detergent.

6. Leave the suit to air-dry

After cleaning or washing, the suit should be left to air-dry. Hang it up or lay it flat in a well-ventilated place.

Avoid direct sunlight and heat from radiators, as these can affect the material over time.

7. Store the suit correctly

Once the suit is completely dry, store it neatly in a dry place. Avoid putting it away damp or leaving it compressed for long periods, as this can affect both durability and fit.

Make everyday cleaning easier

If you use your EMS suit often, a regular routine makes cleaning easier. Give it a quick rinse after use and wash it regularly rather than waiting until it is very sweaty. This takes less time and keeps the suit in better condition.

The most important tip: Gentle care means a longer lifespan

An EMS suit is not ordinary sportswear. Its material and contact surfaces require gentler treatment. If you avoid high heat, harsh chemicals and rough washing, the suit will generally last longer and perform better over time.

Quick checklist before putting the suit away

Before putting your EMS suit away, quickly check the following:

  • is the suit completely dry?
  • is there any soap residue?
  • are all parts correctly assembled?
  • is the suit stored somewhere dry without being compressed?

A small routine after every wash makes a big difference in the long run.